Setting Modem ADSL (Speedy)
Pertama
Sobat harus tahu masing-masing Konfigurasi Encapsulation, VPI, dan VCI,
untuk berbagai macam Modem ADSL, untuk lebih jelas silakan baca di
Setting modem Speedy dari berbagai daerah
Adsl Modem Articonet
ACN-100R dan ACN-110
Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk
setting di komputer dilakukan sesuai dengan operating system yang
dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows
XP.
Lakukan network setting di PC (komputer) sbb :
a. Start – Control Panel – Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password : admin/admin
Setelah masuk ke menu setting lakukan langkah berikut :
Masuk
ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit”
disebelah kanan tabel WAN Masukkan nilai PVC Configuration : (masukkan
nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable WAN Service”, kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
Masukkan username dan password : admin/admin
Setelah masuk ke menu setting lakukan langkah berikut :
Masuk
ke menu “Advanced Setup” kemudian pilih “WAN” dan klik tombol “Edit”
Masukkan nilai PVC Configuration : (masukkan nilainya sesuai wilayah
TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan “Enable Bridge Service”, kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.
Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:
1. Klik Start, klik Setting,klik Control Panel,
2. Klik Network and Dial Up Connections.
3. Klik Make New Connection, klik Next,
4. Klik Dial Up to the Internet
5. Klik I want to setup my internet manually, klik Next
6. Klik I connect through a phone line and a modem klik Next
7. Pilih dan klik modem ADSL yang sesuai
8. Isi username : 15xxxxxxxxxx@telkom.net
9. Password : xxxxxxxx
10. Klik OK dan Lanjutkan sesuai perintah yang muncul
11. Klik Finish
Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:
1. Klik Start, Control Panel, Network Connections.
2. Klik New Connection Wizard.
3. Klik Connect to the Internet, klik Next.
4. Klik Setup my connection manually, klik Next
5. Klik Connect using a broadband connection that requires a user name and password, klik Next.
6. Isi ISP Name “TelkomSpeedy”, klik Next
7. Isi username : 15xxxxxxxxxx@telkom.net dan Password : *******
8. Confirm password : xxxxxxxx
9. Kemudian beri tanda v(centang) pada pilihan “Add a shortcut to the desktop screen”
10. Klik Finish
Adsl Modem TP-Link
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. click Advanced Setup
2. click WAN
3. Find VPI/VCI: 8/81, click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
1. click Advanced Setup
2. click WAN
3. find VPI/VCI: 8/81, click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from provider); PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
Adsl Modem SMC
Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge
1. Click WAN
2. Clik ATM PVC
3. Click VC1
4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
5. Click Save Settings
Adsl Modem SMC
Setting PPPoE
1. Click WAN
2. Click ATM PVC
3. Click VC1
4.
Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR,
PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0,
Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time
(Minute): 5, Username: (nmrspeedy@telkom.net), Password: (password From
Provider), Confirm Password: , MTU: 1492
5. Save Settings
Adsl Modem Shiro
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
Setting PPPoE
1. Pilih Advanced
2. Pilih WAN
3. Klik New Connection
4.
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation:
LLC, Username: (nmrspeedy@telkom.net), Password: (password from
provider), VPI: 8, VCI: 81, and Submit
5. Save Settings
6. Restart Router
Adsl Modem TELCOM
AR1031
Default ip: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
1. Click Advanced Setup
2. Click WAN
3. Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (nmrspeedy@telkom.net); PPP Password: (password from Provider); PPPoE Service Name: Speedy, Next
7. Cheklist Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
Modem Prolink
1.Login To -> http :// 10.0.0.2
User Name : admin
Password : password
Click . . . . OK
2.Chose Configurasi WAN :
3.Select Adapter : Pilih Pvc3 (Indonesia)
4.Edit Field :
Bridge = Enable
Encapsulation = 1483 Bridge IP LLC
ATM VPI = 8
ATM VCI = 81
5.Static IP Setting : “ just blank “
IP Address = just empty
Subnet Mask = just empty
Gateway = just empty
User Name = username@telkom.com . . . . . . ( optional ) **
Password = xxxxxxxx . . . . . . . . . . . . . . . . .( optional ) **
**If you choose to put username & password there just double clik explorer
**If you not choose to put username & password there you have to create new connection at Network Connection
6.Create New Connection (Bridge) See here..>>
7.Than Next :
* Click Submit
* Click Save Configuration
Next : Save Reboot ….
Adsl Modem D-Link
D-Link
DSL-302T
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Setup
2. Click Connection
3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
4. Click Tools
5. Click System Commands, Save All, Restart
Setting PPPoE/Router
1. Click Setup
2. Click Connection
3.
Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username:
(nmrspeedy@telkom.net); Password: (password from provider); VPI=8;
VCI=81, Apply
4. Click Tools
5. Click System Commands. Save All, Restart
Adsl Modem Dareglobal
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced Setup
2. Click WAN
3. Find VPI/VCI: 8/81, Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
7. WAN Setup - Summary, Save
8. Save/Reboot
Setting PPPoE
1. Click Advanced Setup
2. Click WAN
3. Cari VPI/VCI: 8/81, Click Edit
4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
6. Put your PPP Username: (Nomorspeedy@telkom.net); PPP Password: (Password from provider); PPPoE Service Name: Speedy, Next
7. Centang Enable WAN Service, Service Name: Speedy, Next
8. WAN Setup - Summary, Save
9. Save/Reboot
Adsl Modem Repotec
1. open Internet
Explorer ketik : http://192.168.1.1
2. Username : admin & Password : epicrouter
3. Click : OK
class=”MsoNormal”>Click WAN
1. Pic Adapter : Pvc0
2. Click Submit
1.Virtual Circuit = Enabled
2. Bridge & IGMP = Disabled
3a.
Each region was different from another region and for Bandung vpi :8 , vci : 81
3c.Service Category = UBR without PCR
3d.Protocol/Conection type = PPPoE
3e.Encapsulation = LLC/Snap-Bridging
4. Put Username & Password from your provider
5. and Than click Submit.
6. click Save Configuration
(wait till Saving configuration done.)
7. put DNS : 202.134.0.155 & 202.134.2.5
Adsl Modem Billion
1.Login To : http ://192.168.1.254
2.User name = admin
Password = password
Click -> OK
3.Click : Quick Start
4.Edit Connection :
Encapsulation = PPPoE LLC
Bridge = Enabled
Setting VPI = 8 dan VCI = 81 , and Than
Static IP Setting
IP Address = 0.0.0.0
subnet mask = 0.0.0.0
Gateway = 0.0.0.0
5.Click : - Submit
- SAVE CONFIG
6.Click : Submit
7.Wait Till process Configuration done !
8.Configuration Done !
Adsl Modem ZyXeL
P-660R
Default IP: 192.168.1.1
Default username : admin
Default password : 1234
Setting Bridge
1. choose Network
2. choose WAN
3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
4. choose Maintenance
5. choose Tools
6. Restart
Setting PPPoE
1. choose Network
2. choose WAN
3.
Mode: Routing, Encapsulation: PPPoE, Username: (nmrspeedy@telkom.net),
Password: (password speedy), Service Name: Speedy, Multiplexing: LLC,
VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically,
Connection: Nailed-Up Connnection, Apply
4. click Maintenance
5. click Tools
6. Restart
Adsl Modem Aztech
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Setting Bridge
1. Click Advanced
2. Click WAN
3. Click New Connection
4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router
Setting PPPoE/Router
1. Click Advanced
2. Click WAN
3. Click New Connection
4.
Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation:
LLC, Username: (nmrspeedy@telkom.net), Password: (password from
provider), VPI: 8, VCI: 81, and Submit.
5. Save Settings
6. Restart Router
ADSL Linksys WAG200G
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Berikut langkah-langkah setting-nya(for Speedy):
1.
Pastikan semua kabel sudah menancap dengan benar, line telepon, kabel
power, dan gunakan kabel UTP (bawaan) untuk menghubungkan antara
komputer dan modem. Kabel UTP pada modem bisa ditancapkan di port yang
mana saja (ada 4 port).
2. Nyalakan modem, nyalakan komputer, buka Browser
3. Ketikkan pada address bar: 192.168.1.1 akan diminta login admin, masukkan user dan password.
4. Ubah nilai2 item ini:
- Encapsulation : RFC 2516 PPPoE
- Multiplexing : LLC
- QoS type: UBR
- Autodetect: disable
- Virtual circuit: 0 VPI, 35 VCI (*for Sumatra, Jawa Barat, Jawa Tengah, Jawa Timur, Bali, Kalimantan, Sulawesi)
- DSL Modulation: Multimode
- Username: masukkan 12 digit nomor speedy anda diikuti dengan @telkom.net, contoh: 152303123456@telkom.net
- Password: masukkan password yang anda dapat dari telkom. Perhatikan besar kecilnya huruf, jika anda salah input, akan gagal.
- Pilih Connect on demand (koneksi aktif jika diperlukan) atau Keep alive (koneksi aktif terus menerus)
- Scroll layar kebawah, tekan save setting.
5.
Masuk ke menu Wireless -> Wireless security, masukkan password yang
Anda inginkan (minimal 8 karakter), tekan save setting.
6. Selesai!
Anda bisa menutup semua aplikasi dan restart komputer Anda. Wireless
juga siap digunakan. Jika diminta memasukkan password, masukkan 8
karakter yang Anda input tadi.
ADSL Astoria
Default IP: 192.168.1.1
Default username : admin
Default password : admin
Berikut langkah-langkah setting-nya(for Speedy):
1. Ketik 192.268.1.1 lalu login.
2. Quick Start. Setting ATM PVC, isi ATM Protocol yang agan inginkan.
3. Isi VPI/VCI sesuai wilayah agan, liat
disini4. Ubah nilai2 item ini:
- Encapsulation : LLC
- Ip Address biarkan
- Connect type biarkan
- Username: masukkan 12 digit nomor speedy anda diikuti dengan @telkom.net, contoh: 152303123456@telkom.net
- Password: masukkan password yang anda dapat dari telkom. Perhatikan besar kecilnya huruf, jika anda salah input, akan gagal.
- MTU biarkan
lihat gambar dibawah ini:
5. Masuk ke menu Confirm, isinya adalah untuk cek setting yang sudah kita lakukan apakah sesuai atau tidak
6. Kalo sudah selesai, klik finish.
semoga bermanfaat.......
salm BKe.
